Rain Bird sprinkler system repair
We repair and service Rain Bird irrigation systems across Mississauga, Toronto, Oakville, Brampton, Burlington and nearby. Most Rain Bird parts are replaced like-for-like; where a part is discontinued we fit a compatible equivalent.
What we fix on Rain Bird systems
Typical repair calls include:
- Controller faults and reprogramming
- Valves that won't open or won't shut off
- Failed solenoids and field-wire faults
- Broken, stuck or misaligned spray and rotor heads
- Leaks in lines, fittings and manifolds
Seasonal service
We also handle spring startups and fall winterizations on Rain Bird systems, including checking the backflow and adjusting heads.
Common questions
- Do you need the original installer's plans?
- No. We trace zones and wiring on site during the diagnosis.
- Can you replace an old Rain Bird controller with a Wi-Fi one?
- Usually yes — most controllers swap onto the existing valve wiring.
Related services
More guides
- How to winterize and blow out a sprinkler system in Ontario
- Drip irrigation for garden beds and planters
- Smart Wi-Fi sprinkler controllers explained
- How an irrigation system is installed, step by step
- DIY sprinkler system vs professional installation
- Sprinkler system troubleshooting: common problems and fixes
- Sprinkler zone won't turn off: causes and fixes
- Low sprinkler pressure: why heads spray weakly
- Valve box full of water: what it means
- Lawn sprinkler systems: a homeowner's guide
- Lawn watering restrictions in the GTA
- Hunter sprinkler system repair
- Orbit sprinkler system repair
- Toro sprinkler system repair
- Weathermatic sprinkler system repair
- K-Rain sprinkler system repair
- When to winterize your sprinkler system in the GTA
- When to turn your sprinklers on in spring in Ontario
- Sprinkler system cost in Toronto and the GTA
- What sprinkler winterization costs in the GTA