Low sprinkler pressure: why heads spray weakly
If one zone sprays weakly it's usually that zone. If every zone is weak, look at the supply. Work from the source outward.
Every zone is weak
Check the irrigation shut-off and backflow valves are fully open, and whether household use (laundry, showers) overlaps your watering time.
One zone is weak
A broken lateral line or cracked fitting bleeds pressure — look for a soggy spot. Clogged nozzles or filters also restrict flow.
It was always weak
The zone may have more heads than your water supply can run at once. The fix is splitting it into two zones or changing nozzles.
Common questions
- Can you add a zone to fix low pressure?
- Yes — splitting an overloaded zone is a common fix during a repair visit.
Related services
More guides
- How to winterize and blow out a sprinkler system in Ontario
- Drip irrigation for garden beds and planters
- Smart Wi-Fi sprinkler controllers explained
- How an irrigation system is installed, step by step
- DIY sprinkler system vs professional installation
- Sprinkler system troubleshooting: common problems and fixes
- Sprinkler zone won't turn off: causes and fixes
- Valve box full of water: what it means
- Lawn sprinkler systems: a homeowner's guide
- Lawn watering restrictions in the GTA
- Rain Bird sprinkler system repair
- Hunter sprinkler system repair
- Orbit sprinkler system repair
- Toro sprinkler system repair
- Weathermatic sprinkler system repair
- K-Rain sprinkler system repair
- When to winterize your sprinkler system in the GTA
- When to turn your sprinklers on in spring in Ontario
- Sprinkler system cost in Toronto and the GTA
- What sprinkler winterization costs in the GTA